Lumberjack BS254 Review Band Saw Professional 254mm/10″ Tilt Table Woodworking

Lumberjack BS254 Review

some of our visitors just need to checkout reviews from actual buyers…

See What People Are Saying About This Tool! 😮
Link to reviews is below photo.


 

We looked at the tool:

we are currently writing about this tool, aiming to give you a great overview of benefits and features.

this section is due to be updated this month 2017.

you can still checkout reviews from people who own this tool by going to the link under the photo. >

 

Description and Features Below still stand.
We just wanted to improve our site and write up a fresh description for this tool.

 

The Lumberjack BS254 Details and Spec is Below:

Tool Description and Specifications:

A compact floorstanding woodworking bandsaw with a massive cutting capacity, for a machine of this size and price, of 150mm (6″). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B250 has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 90 degrees to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied Maximum cutting depth – 150mm (6″) Throat width – 245mm (10″) Table size – 360mm x 320mm Table tilt – 90-45 degrees Cutting speeds 400 & 800Huge 6”/150mm Cutting Depth Capacity

BS254 Features:

Huge 6”/150mm Cutting Depth Capacity
10”/254mm Cutting Width (Throat)
Precision Ground Cast Iron Work Table
Quiet Induction Motor — Mains Powered LED work Light
Integral Dust Collection Tray —- Includes Floorstand

 

 

The Lowest Buy Now Price we found for
Lumberjack BS254 – is on AMAZON (click for link)

 

Go to top Lumberjack BS254 Review

 

Sharing is caring!

Related posts: